Echelon Neuron User Manual
Page 140
132
Neuron Exporter Errors (NEX)
NEX#
Description
57
Unable to determine beta-2 control value using transceiver <xcvr> [NEX#57]
Unable to determine the beta-2 control value. See error message for failure
details. Verify that your standard transceiver database (stdxcvr.xml) has
not been corrupted. An update might be available from the
bsite.
58
Unable to determine transmit interpacket padding using transceiver <xcvr>
[NEX#58]
Unable to determine the transmit interpacket padding. See error message
for failure details. Verify that your standard transceiver database
(stdxcvr.xml) has not been corrupted. An update might be available from
website.
59
Unable to determine receive interpacket padding using transceiver <xcvr>
[NEX#59]
Unable to determine the receive interpacket padding See error message for
failure details. Verify that your standard transceiver database
(stdxcvr.xml) has not been corrupted. An update might be available from
website.
60
Unknown command ID <id> [NEX#60]
This is an internal error condition.
61
Cannot create file '<file>' (missing external utility <utility>) [NEX#61]
A file <file> cannot be created because tool <utility> is missing, or cannot
be found on the system search path.
62
Cannot export 'clone domain' and 'no domain' (the two features are mutually
exclusive) [NEX#62]
When exporting an image as configured, this image can be exported with
domain information, without domain information ('no domain'), or into the
'clone domain'. These three scenarios are mutually exclusive. See the
Neuron chip or Smart Transceiver data book and the
NodeBuilder FX
User’s Guide
for details about exporting configured images.
63
The configured image can not be exported authenticated in the chosen domain
configuration [NEX#63]
For an image to be exported authenticated, a domain ID (with a length of 1,
3, or 6 bytes), and a subnet/device id (different from 0/0) must be used
unless the firmware supports open media authentication. See the Neuron
Chip or Smart Transceiver data book and the
NodeBuilder FX User’s Guide
for details about exporting configured images.