Echelon Neuron - Manual (Page 28)

20 LonTalk Interface Developer Errors (LID)
LID# Description
27 Unexpected file I/O error when reading a file
Refer to the error message for details of the failure cause.
28 Unexpected error (not a file I/O error) when reading a file
Refer to the error message for details of the failure cause.
29 Unexpected file I/O error when writing a file
Refer to the error message for details of the failure cause.
30 Unexpected error (not a file I/O error) when writing a file
Refer to the error message for details of the failure cause. The error
message contains details such as “disk full” or “file access denied”.
31 A type definition cannot be generated: the type is referenced but not defined
A type that you have referenced is missing from the NCT file, and
intermediate file used by the LonTalk Interface Developer utility. This is
an internal error. Delete all intermediate files. Re-run the LonTalk
Interface Developer utility in Trace verbosity mode and carefully examine
the LonTalk Interface Developer utility Summary window to determine the
root cause of the failure. If the problem persists, contact Echelon technical
support, submitting all files produced by the LonTalk Interface Developer
utility when running in Trace verbosity level.
32 A type definition is provided but seems incomplete -- an element is missing
This is an internal error. Delete all intermediate files. Re-run the LonTalk
Interface Developer utility in Trace verbosity mode and carefully examine
the LonTalk Interface Developer utility Summary window to determine the
root cause of the failure. If the problem persists, contact Echelon technical
support, submitting all files produced by the LonTalk Interface Developer
utility when running in Trace verbosity level.
33 Anonymous types are not supported
Any type used for network variables or configuration properties must have
a name. The use of constructs such as, “network input struct { int a, b; }
nviZorro;” is not permitted.
34 A compiler feature cannot be selected
Refer to the error message for details of the failure cause. This error might
be the result of conflicting preferences in the default command file,
LonNCC32.def, located in the LonTalk Interface Developer utility's project
file. Refer to the
Neuron C Programmer's Guide and Neuron C Reference
Guide for more details about the command line tools and script files.