Echelon Neuron User Manual
Page 16
8
NodeBuilder Debugger Errors (DBG)
DBG#
Description
62
Network interface must be configured to run VNI [DBG#62]
Use the control panel to select a VNI network image. The name depends on
which network interface you use. For the PCLTA-20 use: PCL10VNI. Do
not use NSIPCLTA or PCC10L7.
63
Device not found in network database [DBG#63]
Remove the device from the NodeBuilder project tree view. You can then
right-click the Devices folder, click Insert on the shortcut menu, and then
select the device you want to debug. You may have to re-drop the target
device shape with LonMaker.
64
Cannot debug this device because it is unconfigured. Use the LonMaker
Commission command to commission it and try again [DBG#64]
65
Cannot debug this device because it is applicationless. Use the LonMaker Load
command to load the application image and try again [DBG#65]
66
Cannot debug this device because it is hard-offline. Use the LonMaker Device
Manage command to put it online and try again [DBG#66]
67
Cannot debug this device because it is soft-offline Either reset it or use the
LonMaker Device Manage command to put it online [DBG#67]
68
Failed to write device memory. Please try again [DBG#68]
69
Failed to read device memory. Please try again [DBG#69]
70
A device being debugged either stopped communicating or was deleted. The
debug session will stop [DBG#70]
71
Device did not respond to Query Status command [DBG#71]
Probably not a serious problem. The device may not have responded
because of a lost packet.