Echelon Neuron - Manual (Page 142)

134 Neuron Exporter Errors (NEX)
NEX# Description
74 The <transceiver_name> transceiver requires a minimum clock rate of
<clock_rate> MHz [NEX#74]
The chosen transceiver requires the Neuron Chip or Smart Transceiver to
operate at a certain minimum clock rate; please consult your transceiver or
Smart Transceiver data book for details.
75 The <transceiver_name> transceiver supports a maximum clock rate of
<clock_rate> MHz[NEX#75]
The chosen transceiver requires the Neuron Chip or Smart Transceiver to
operate at a certain maximum clock rate; please consult your transceiver or
Smart Transceiver data book for details.
76 The <neuron_model> Neuron model requires a minimum clock rate of
<clock_rate> MHz[NEX#76]
The chosen Neuron or Smart Transceiver model cannot operate at the
selected clock rate; instead the minimum clock rate indicated in the
message is required.
77 The <neuron_model> Neuron model supports a maximum clock rate of
<clock_rate> MHz[NEX#77]
The chosen Neuron or Smart Transceiver model cannot operate at the
selected clock rate; the maximum clock rate is indicated in the message.
78 Transceiver doesn't support attenuation measurements[NEX#78]
Some powerline transceivers support an –attenuation command. This error
is returned when this command is invoked on a transceiver that does not
support it.
4001 Inserting XIF appendix <filename> might have caused an unwanted duplication
of records. Verify the XIF file for correctness [NEX#4001]
Multiple XIF appendix files might have caused duplication of template and
value file records. More than one of the following files contributed to the
resulting XIF template and value file records: .BF2, .XF2, and a possible
explicit XIF extension file (--xifappendix command). Verify the resulting
XIF file, and remove explicit or implicit XIF appendix files if no longer
needed.
4002 Applicationless state disables some Reboot Options [NEX#4002]
A device has been exported as applicationless. Some of the reboot options
requested are meaningless for this configuration, and will be ignored.
4003 Specified Reboot Options will prevent network loading [NEX#4003]
The specified reboot options prevent loading of the application image over
the network.