Echelon Neuron User Manual
Page 33
Neuron Tools Errors Guide
25
LID#
Description
68
The <s> Micro Server does not support transceiver <t> in the chosen
configuration
This error can occur if you specify incorrect clocking details for the LonTalk
Interface Builder (the command-line interface for the LonTalk Interface
Developer utility). Check your preferences.
This error code applies only to a ShortStack Micro Server.
69
The <s> Micro Server is not supported by the Micro Server database
This error can occur if you incorrectly specify the Micro Server for the
LonTalk Interface Builder (the command-line interface for the LonTalk
Interface Developer utility). Check your preferences.
This error code applies only to a ShortStack Micro Server.
70
Error loading the Micro Server database: <detail>
This error occurs upon a particular failure when loading the Micro Server
database, as detailed in the error message. Unless the error detail suggests
a different remedy, you should re-install the product and choose the Repair
option when prompted.
Also, temporarily remove any user-defined extensions to the Micro Server
database (that is, remove or rename the UserServers.xml file).
This error code applies only to a ShortStack Micro Server.
71
Clock multiplier <m> is not supported in this configuration
This error can occur if you specify an incorrect set of arguments for the
LonTalk Interface Builder command line interface (the command-line
interface for the LonTalk Interface Developer utility). Check your
arguments.
72
<f> external clock is not supported in this configuration
This error can occur if you specify an incorrect set of arguments for the
LonTalk Interface Builder command line interface (the command-line
interface for the LonTalk Interface Developer utility). Check your
arguments.
Note that the -clock parameter refers to the external clock, not the system
clock.
4001
An XIF file contains more fields than expected
Refer to the warning message for line # and filename. This might result in
an automatic downgrading of the device interface file to the version
supported by the FTXL or FTXL tools. Che
available updates.