General, Product labeling (examples), Warranty label – Hatteland Display 20 inch - HM 20T07 CMD User Manual
Page 12
12
IND100077-77
General
Serial Number, Warranty and Warning label locations
Product Labeling (examples)
Manufacturer:
Product: 100W 115VAC/60Hz/400Hz
Hatteland Display 20,1 Inch 230VAC/50Hz/400Hz
NORWAY
TFT
Date: 20070426
Serial Number:
HM 20T07 NMD-A1-0
Manufacturer/Country
Product Description
Barcode (TYP+SNO)
Date of Production
Power Rating
Input Voltage
Serial Number
Manufacturer:
Product: 100W 115VAC/60Hz/400Hz
Hatteland Display 20,1 Inch 230VAC/50Hz/400Hz
NORWAY
TFT
Date: 20070426
Serial Number:
HM 20T07 L-3-AF1-831
ID PRODUCT TYPE NUMBER NOMENCLATURE EXAMPLE
Can contain other chars based on customer solutions?
HM = Manufacturer Product Series ID
NO
20 = TFT Panel Size in inches ID
NO
T = TFT Technology (Thin Film Transistor) ID
NO
0 = Internal PCB Electronics Revision ID
NO
7 = TFT Panel Generation ID
NO
NMD
CMD = Abbreviation Product Family ID (Naval Multi Display or Combat Management Display)
YES
A1 = Sub Hardware Revision ID
(For a full overview, see specification datasheet or contact your provider)
YES
0 = Serial Number starting from 0 and increasing.
NO
Note: The table above is an example only for the label shown in this chapter.
Warranty Label
If you are to perform service on a
unit still under warranty, any
warranty will be void if this label
show signs of removal attempts
(re-gluing) or removed completely.
This label is located on the back
of the product and covers a key
screw. This is to aid service
departments to determine if there
has been any unauthorized
service on a unit still under
warranty.
WARNING
Hazardous material.
Lamps contain
mercury vapor.
WARNING
Hazardous material.
Lamps contain
mercury vapor.