Specifications - hm 20t07 nmd, Product specifications - hm 20t07 nmd – Hatteland Display 20 inch - HM 20T07 CMD User Manual
Page 38
38
IND100129-97
Note: All specifications are subject to change without prior notice!
2/2
PRODUCT SPECIFICATIONS - HM 20T07 NMD
TFT Technology:
• High Quality SHARP® TFT
• 20.1” viewable image size
• a-Si TFT (Thin Film Transistor) Active Matrix
• Optical Bonding Technology
TFT Characteristics:
• Native Resolution
: 1600 x 1200
• Pixel Pitch (RGB)
: 0.255 (H) x 0.255 (V) mm
• Response Time
: 20 ms (typical), rise + fall
• Contrast Ratio
: 500:1 (typical)
• Light Intensity
: 250 cd/m2 (typical)
• Viewable Angle
: +/- 88° (typical) (Up/Down/Left/Right)
• Active Display Area
: 408.0 (H) x 306.0 (V) mm
• Max Colors
: 16.7 million
Synchronization:
• Digital separate synchronization
• Composite synchronization
• Synchronization on green
• Auto detects VGA -> UXGA, interlaced and non interlaced
• Video Signal
: Analog RGB 0,7Vp-p- Input Impedance 75Ω
• Horizontal
: 15.0 kHz to 75 kHz
• Vertical
: 56 Hz* to 75 Hz
Resolutions:
• VGA
: 640 x 480 (including 640 x 350)
• SVGA
: 800 x 600 (including 720 x 400)
• XGA
: 1024 x 768
• SXGA
: 1280 x 1024
• UXGA
: 1600 x 1200*
* Recommended in 60Hz for optimal picture quality. 56 Hz only in 800x600
Power Supply Options:
• 115VAC/50/60/400Hz & 230VAC/50/60/400Hz - A1/C7 models
• 24/28 VDC
- A2/C8 models
Power Specifications
• Power Consumption: Operating 75W (typical) - 100W (max)
• Inrush Current: 10A for 24/28VDC, Max. (@ 25 deg. C)
• Inrush Current: 10A for 115VAC, Max. (@ 25 deg. C)
Physical Dimensions:
• 482.00 (W) x 399.00 (9U) (H) x 95.00 (D) mm
• 18.98" (W) x 15.71" (9U) (H) x 3.74" (D)
• Weight: 11.5 kg
I/O Signal Terminals Rear:
• DVI-I Signal IN
: 1 x 29p DVI-I (or as RGB IN with adapter)
• RGB Signal IN
: 5 x BNC J01(R)+J03(G)+J05(B)+J07(H)+J08(V)
• RGB Signal OUT
: 3 x BNC J02(R)+J04(G)+J06(B)
• If AC Power IN
: 1 x Circular MIL P/N: AMP - MS27468T9F98P
• If DC Power IN
: 1 x Circular MIL P/N: AMP - MS27468T15F5P
• Grounding
: 1 x M4 Internal Screw Thread
• Combined Touch / SCOM+BIT Interface: 1 x 9p D-SUB (female)
User Controls / On front bezel:
• BIT Function button
• INV Alarm Indicator LED
• Power ON/OFF button
• On Screen Display control (OSD/OSM) button
• Up/Down OSD Navigation / Hotkey Set #1 buttons
• +/- Brightness Control
• All buttons have backlighting
User Controls / Rear:
• Mains Power ON/OFF Toggle Switch
The unit is tested according to the following:
MIL-STD 461E, 1999
• CE 101 - Conducted emission, 30 Hz - 10 kHz
• CE 102 - Conducted emissions, 10 kHz - 10 Mhz
• CS 101 - Conducted susceptibility, 30 Hz - 50 kHz
• CS 114 - Conducted susceptibility, 10 kHz - 200 MHz
• CS 116 - Conducted susceptibility, damped oscillatory waves
• RE 101 - Radiated emission, H-field, 30 Hz - 100 kHz
• RE 102 - Radiated emissions, E-field, 10 kHz - 10 GHz
• RS 101 - Radiated susceptibility, H-field, 30 Hz - 100 kHz
• RS 103 - Radiated susceptibility, E-field, 2 MHz - 18 GHz
• HM 20T07 NMD-A1
= AC Power
• HM 20T07 NMD-A2
= DC Power
• HM 20T07 NMD-C7
= AC Power + Resistive Touch Screen
• HM 20T07 NMD-C8
= DC Power + Resistive Touch Screen
• Resistive Touch Screen (8 wire)
• Color Calibrated models (ECDIS)
TEST
LEVEL
SPECIFICATION
Dry heat storage
70 deg. C
Mil-Std-810F
Cold storage
-40 deg. C
Mil-Std-810F
Operating
Temperature
(typ)
AC Model: -15 to +55 deg. C
DC Model: -15 to +55 deg. C
Mil-Std-810F
Humidity
95% at 40 deg. C
Mil-Std-810F
Shock
60g / 11ms
IEC 60068-2-27 (1987), Test Ea
Grade A Shock
Class I (hard-mounted)
MIL-S-901D
Transient Shock
2-280 Hz
Designed to envelope a
half sine shock pulse of
50g / 35ms
IEC 60068-2-57 (1999-11), Test Ff
Rain (drip proof)
-
MIL-STD-810F *
Salt Fog
-
MIL-STD-810F
Vibration Testing
-
MIL-STD-167-1
• VSD100694-1 = External 10-foot (3.0m) AC power cable NEMA (Halogen Free)
• VSD100695-1 = External 10 foot (3.0m) AC power cable Europe (Halogen Free)
• VSD100696-1 = External 10 foot (3.0m) DC power cable (Halogen Free)
NSN (NATO Stock Number): 7025-01-576-3091
Technical Description:
Mechanical Description:
Environmental Performance:
EMI Testing:
* Console mounted.
Typical Type Numbers:
Factory Mounted Options:
T E S T I N G / A P P R O V A L S & C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
MIL-STD 461E, 1999
MIL-S-901D Class I (hard-mounted) Grade A Shock
EN60945 4th (IEC945 4th) IACS E10
Available Accessories:
Specifications - HM 20T07 NMD