Hatteland Display 20 inch - HM 20T07 CMD - Manual (Page 63)

63
Video Controller Interface Commands
Command Table
IND100103-1
Video Port Select 0xbe, ”0”, ”?”
0xbe “0” , “R” | “r”
0xbe, ”0”, n
0xbe, “1”, “?”
0xbe, “1”, “R” | “r”
0xbe, “1”, n
0xbe, “2”, “?”
0xbe, “2”, “R” | “r”
0xbe, “2”, n
Query Composite Video Port No.
Set Composite Video Port No.
= “0”
Set Composite Video Port
Number
Query Svideo Port Number
Set Svideo Port Number = “0”
Set Svideo Port Number
Query Component Video Port
No.
Set Component Vid. Port No. =
“0”
Set Component Video Port
Number
“0n” – Port number
OSD H position 0x90,
nnn | “+” | “-” |
“r” | “R” |
“?”
Set osd_hpos =
value/increment/decrement
Reset
Query
OSD horizontal position.
OSD V position 0x91,
nnn | “+” | “-” |
“r” | “R” |
“?”
Set osd_vpos =
value/increment/decrement
Reset
Query
OSD vertical position.
OSD Transparency 0x92,
n | “+” | “-” |
“r” | “R” |
“?”
Set OSD transparency =
value/increment/decrement
Reset
Query
OSD tranparency.
Rotate OSD 0x8f, “0” | “1” |
“?”
Disable/enable OSD rotate
Query
“0” – normal OSD.
“1” – rotated OSD.
Freeze frame 0xc6, “0” | “1” Unfreeze / freeze frame “0” – unfreeze.
“1” – freeze.
Zoom level 0xa8,
nn | “+” | “-” |
“r” | “R” |
“?”
Set Zoom level =
value/increment/decrement
Reset
Query
Zoom level.
Zoom H position 0xa9,
nnn | “+” | “-” |
“r” | “R” |
“?”
Set Zoom_hpos =
value/increment/decrement
Reset
Query
Zoom window horizontal position.
Zoom V position 0xaa,
nnn | “+” | “-” |
“r” | “R” |
“?”
Set Zoom_vpos =
value/increment/decrement
Reset
Query
Zoom window vertical position.
Direct Access
(Hotkeys)
0xa0, “1”,
n |
“r” | “R” |
“?”
Set Hotkey 1=
Value
Reset
Query
“0” – audio mute.
“1” – volume.
“2” – brightness.
“3” – contrast.
“4” – color.
“5” – input source.
“6” – video input.
“7” – zoom
“8” – freeze
“9” – PIP
“A” – Test Pattern
“B” – No function
Function Command Description Acknowledge (if enabled)