Hatteland Display 20 inch - HM 20T07 CMD - Manual (Page 29)

29 Operation
IND100064-22
FIG 1 FIG 2
OSD MENU - Advanced:
To access the “Advanced/Full” OSD Menu, please do the following 4 steps:
1: Make sure the unit is powered off.
2: Now, press and hold down the “DOWN ARROW” (FIG1) button while also pressing the power button (FIG2).
3: After the input signal appears on the screen, release both the power button and “DOWN ARROW” button.
4: Now, press MENU and you should have access to more advanced functions of the OSD MENU.
WARNING !! ONLY A QUALIFIED SERVICE ENGINEER SHOULD ACCESS THE
ADVANCED/SERVICE MENU. PERFORMANCE OF THE DISPLAY MAY BE SERIOUSLY AFFECTED!
OSD MENU - NOTICE!
PLEASE NOTE that the video controller software are based on a standarized factory firmware which include
functionality for VIDEO SIGNALS. The HM 20T07 models does not have any video inputs physically, so references
or functions explained in this chapter regarding COMPOSITE, VIDEO, S-VHS, S-VIDEO and PIP (Picture In Picture) does
NOT apply for the HM 20T07 models.
Please ignore references to VIDEO functionality in the On Screen Display menu and in this chapter.
Operation