Hatteland Display 20 inch - HM 20T07 CMD - Manual (Page 62)

62
Video Controller Interface Commands
Command Table
IND100103-1
Scalar V Clipping 0xae,
nnn | “+” | “-” |
“r” | “R” |
“?”
Set the vertical clipping size for
non-linear scale mode =
value/increment/decrement
Reset
Query
Scalar vertical clipping
Scalar V Offset 0xaf,
nnn | “+” | “-” |
“r” | “R” |
“?”
Set the vertical offset of the
display window for non-linear
scale mode =
value/increment/decrement
Reset
Query
Scalar vertical offset.
Scalar V stretch 0xb0,
nnn | “+” | “-” |
“r” | “R” |
“?”
Set vertical stretch factor for
non-linear scale mode =
value/increment/decrement
Reset
Query
Scalar vertical stretch.
Select OSD
language
0x95,
n |
“r” | “R” |
“?”
Select language =
English, Danish, Chinese
Reset
Query
“0” – English.
“7” – Danish
“8” – Chinese
Input main select 0x98,
n | “+” | “-” |
“r” | “R” |
“?”
Select input main =
PC or VIDEO or next available
Reset
Query
Main selected.
“0” – PC.
“1” – Composite video.
“2” – S-video.
“3” – Component video.
“4” - DVI
Select menu timeout 0x93,
nn | “+” | “-” |
“r” | “R” |
“?”
Select menu timeout =
value/increment/decrement
Reset
Query
OSD menu timeout value.
“00” – Continuous.
value – Round up to nearest
available step.
if value > max available step, set
it to the max available step.
DPMS Option 0x9f,
“0” | “1” |
“r” | “R” |
“?”
Set power down option =
On/Off
Reset
Query
“0” – Off.
“1” – On.
Display Video
Source Select
0xbc,
“?” |
“0” |
“1”
Query
Name of video source not
displayed.
After switching to a new video
source, the name of the
video source is displayed for 5
seconds.
“0” – disabled.
“1” – enabled.
Auto source select 0x99,
“0” | “1” |
“r” | “R” |
“?”
Set exclusive or priority =
Exclusive/Proirity
Reset
Query
“0” – Exclusive.
“1” – Priority.
“2” – Priority during power up.
GAMMA value
select
0x9d,
n |
“r” | “R”
“?”
Select GAMMA value =
Value
Reset
Query
GAMMA value:
“0” – 1.0, “1” – 1.6
“2” – 2.2, “3” – User Defined
Function Command Description Acknowledge (if enabled)