Heath Consultants GT Series - Manual (Page 133)

12-9
OPERATOR MAINTENANCE
10) Attach chemical filter to filter bulb, in a clockwise
direction, then tighten to secure. See Fig. 12.4.
Note:
Care must be taken not to overtighten the
chemical filter.
11) Before attaching the probe connector to the
chemical filter, check the probe washer for signs
of damage. If damaged, it must be replaced with a
new probe washer (Part No.12379).
12) Attach probe connector to the chemical filter, in a
clockwise direction, then tighten to secure. See
Fig. 12.4.
Note:
Care must be taken not to overtighten the
probe connector.