4 time and date, 5 calibration due date, Cal due – Heath Consultants GT Series User Manual
Page 26: Calibration due date, Date, Due, cal, Time, 4 time and date -4 3.5 calibration due date -4
Advertising
3-4
USER HANDBOOK
3.4 TIME AND DATE
The time and date from the instruments built-in clock is
displayed on the screen during warm-up, as shown in
Fig. 3.4.
If datalogging is being used, the time and date is set from
this clock. This may be important when viewing the logged
data.
Fig. 3.4 Time and Date
3.5 CALIBRATION DUE DATE
The CAL DUE date can be set by the workshop and is set
to 365 days by default. The date can be set from 1 to 400
days.
The CAL DUE is reset when the instrument is successfully
calibrated.
The CAL DUE feature has five (5) configurable options:
1. Cal Due Date message is not displayed.
Advertising