Pressure, Purge, Sniffer – Heath Consultants GT Series User Manual
Page 21
Advertising
2-3
GENERAL FEATURES
Purge
This mode is used in gas and air purging applications.
Refer to Chapter 8 for Purge mode operation.
Sniffer
This mode is used to find small fitting leaks. Very fast
detection rates are achieved using the semiconductor
sensor in the probe.
Refer to Chapter 9 for Sniffer mode operation.
Pressure
In this mode, the instrument can be used as a manometer
to measure appliance and regulator pressure and to check
the system for leaks.
Refer to Chapter 10 for Pressure mode operation.
Advertising