Heath Consultants GT Series - Manual (Page 77)

7-1
CO (CARBON MONOXIDE) MODE
CO (CARBON MONOXIDE) MODE
The CO mode is used to check the interior of premises
and appliances for CO leakage.
7.1 CO RANGES
The CO mode can have the following ranges available:
• 0 – 2000 ppm CO
• 0 – 25% O
2
(If fitted)
7.2 CO FEATURES
CO mode has the following features available:
Three possible display options (CO Direct / Differential /
Air Free).
• Backlight
• Flashlight
• Datalogging (automatic every 60 seconds)
• Invert Display
• Manual Logging is also available. This will log all
gas concentrations at that instant
• Pump ON / OFF
7