HITEC H4: DC/DC, Four-Port Multi-Charger - Manual (Page 21)

Hitec
Instruction Manual
21
.KVJKWO$CVVGT[
$CNCPEG%JGEMGT
Plug the battery cell balance cord into any one of the H4 channels, and press and hold the channel select for 2 seconds or until the Cell Checker screen appears
indicating the battery is connected to the H4. With this feature you can easily check the cell’s status on the screen. Use the +/- keys, you can select your battery
type. Use the Stop / ESC button to exit the feature.
The Hitec H4 Multi Charger provides a Battery Cell Balance Check function so you don't need a separate device to check the balance of your battery's cells. The
display will show, the number of cells, percentage of capacity remaining, minimum and maximum cell voltage as well as the range of balance. Also displayed are
each individual cells voltage so you easily identify a bad cell if necessary.
The cell value displayed may differ from other manufacturer's cell balancers.
% value from charge/discharge screen is showed just for your reference. It can be differed depending on battery condition
Note
or