HITEC H4: DC/DC, Four-Port Multi-Charger - Manual (Page 29)

Hitec
Instruction Manual
29
$CVVGT[&KUECTF/QFG
Once the Discard Mode processed most batteries cannot be recovered. Please use this function carefully. Discard Mode supports all batteries that
can be charged with the Hitec H4 Multi charger
Battery type should be selected before enter the ‘System Menu’
The H4’s Battery Discard function is very useful for safely disposing your batteries. When you have to dispose of any rechargeable batteries, you should discharge
the to a safe voltage level.
You will receive a ſnal warning before the execution of this
function. Press enter to proceed.
9CTPKPI
9CTPKPI
To get to the Battery Discard Mode function you must go to
the second System Mode screen. To enter System Mode
simultaneously press the [ ] [ ] buttons until the System
Mode screen appears. Use the V button to scroll down to
Discard Mode Start. Press and Hold until the battery type
screen appears. The type of battery pack will appear along with the number of
cells. If the battery type is incorrect you must go back to the
charge setup menu and change it. If the number of cells is
incorrect use the + or – buttons to enter the correct number of
cells. Once everything is correctly set press Enter to continue.
You can watch the status of the Discard Mode function on
the screen.
2Sec.