HITEC H4: DC/DC, Four-Port Multi-Charger - Manual (Page 25)

Hitec
Instruction Manual
25
&GVCKN%JCTIG&KUEJCTIG
$CVVGT[+PHQTOCVKQPQP5ETGGP
5GEQPFCT[%JCTIG&KUEJCTIG5ETGGP
This screen displays the type of charge End Time, End Capac-
ity, End Temperature, End Voltage cutoff, Trickle current and
Delta Peak setup.
+PHQTOCVKQP&KURNC[GF9JKNG%JCTIKPI&KUEJCTIKPI0K%FQT0K/J$CVVGTKGU
The following section describes the various types of information available to you during the charge or discharge process for NiCd or NiMh batteries. Use the [ ] and
[V] menu buttons to scroll through the displays.
/CKP%JCTIG&KUEJCTIG&KURNC[5ETGGP
The main display indicates Charging Current, Current Battery
Voltage, current Process, Input Voltage, Output power and battery
temperature if temp probe is connected. 5WOOCT[%JCTIG5ETGGP
This screen shows the type of charging or discharging, current voltage
and charge current of the pack along with the chargers input voltage and
the packs temperature if a temp sensor is being used.
5WTXGKNNCPEG/QPKVQT5ETGGP
The H4 can display each of the 4 channel’s information at
the same time. Displayed are each battery's voltage, charge
Amperage and charge/discharge
During the Cycling, you can see the battery cycle data.