HITEC H4: DC/DC, Four-Port Multi-Charger - Manual (Page 30)

30
Hitec
Instruction Manual
*KVGE%JCPPGN$TKFIG%JCTIKPI
%JCPPGN$TKFIG5GVWR
The Hitec Channel Bridge function has a unique and specialized R/C purpose. Using the Hitec Channel Bridge system you can bridge two 120 watt charge ports
together so they can be used as a higher current 240 watt single port. With this innovative function, the H4 can cover both the R/C novice and high end user’s
demands.
The charge/discharge rates used with Hitec's Channel Bridge Function requires a high current power supply source. Please read these instructions
carefully.
9CTPKPI
The ſrst choice you must make is the type of bridge setup
you wish to employ. To get to the Channel Bridge setup you
must go to the second System Mode screen. To enter System
Mode simultaneously press the [ ] [ ] buttons until the
System Mode screen appears. Use the V button to move the cursor to ‘OUTPUT SET’ to
select the bridge channel ports. There are 4 types of bridges
to choose from. See Page 31 & 32 for detailed information
on the types of bridges available. Select the type of bridge for
your purpose and press the ‘STOP/ESC’ button.
%JCPPGN$TKFIG%JCTIKPI
Setting up charging using two bridged channels is exactly the same as setting up an individual channel. When you select bridged channels to setup both LED lights
will be lit indicating what channels are bridged.