Labconco WaterPr BT Systems 90153 Series - Manual (Page 19)

Installation
11
2 For system installed under a counter pass the tubing through a hole
provided in the counter.
• Cut the tie wrap attaching the tubing and cables.
• Connect the tubing from the remote dispenser to the water system:
black tubing to the black tubing, and transparent tubing to the
transparent tubing.
3 • Connect the 2 electrical connectors (Molex + Picoflex) to the PC
Board.
4 • Make sure the system operates correctly before installing the cover
panel. (It will not be possible to remove once attached).
5 • Install the cover panel.
6 • Secure the cover with screw provided by inserting the screw through
the top of the cover and tightening it to the top of the panel.