Labconco WaterPr BT Systems 90153 Series - Manual (Page 58)

Maintenance
50
Sanitizing the System and the Tank
C • Open the front cover (this may require removal of the Final Filter) to
let the system go into STANDBY mode (C).
D • Remove the Vent Filter and install the clear elbow fitting from the
Sanitization Kit (D).
E • Introduce the male connector of the clear tubing firmly into the
elbow fitting (E).
F • Inject 200 ml (1 ml = 1 cc) of Hydrogen Peroxide solution (30%) into
the 6 Liter tank via the clear tubing (F).
• Rinse the air vent port with 200 ml of purified water.
Continued on next page