Labconco WaterPr BT Systems 90153 Series - Manual (Page 35)

27
Using the WaterPro® BT System
Understanding the Display
The Display is used to view information about the Operating Modes, the Operating Parameters, Maintenance or
Alarm messages and the Tank Level.
Operating Modes
Operating Parameters
Maintenance or Alarms
Tank Level
100 %
tank full
10%
UV System only
How to Get Water from the WaterPro® BT System
Product Water Using the Dispensing Button
There are two ways to get water using the Dispensing Button:
Press once and release. OR Press and hold down.
To stop dispensing water,
press the Dispensing Button once again. To stop dispensing water,
release the Dispensing Button.
The system will dispense water continuously until the 10% Tank Level display is reached. At the 10% level, the
system will automatically stop dispensing water.