Installation of the vent filter, Installation of the clear tubing, Ion installation of the – Labconco WaterPr BT Systems 90153 Series User Manual
Page 25: Vent filter), Installation
Advertising
17
Installation of the Vent Filter
A
•
Obtain the Vent Filter.
•
Insert the Vent Filter firmly into the port (A, B).
B
Installation of the Clear Tubing
C
•
Locate the clear Clear Tubing and the Barbed Fitting from the
Accessories Bag.
•
Screw the Barbed Fitting onto the bottom end of the POU
Dispenser (C).
D
•
Push one end of the Clear Tubing onto the end of the Barbed
Fitting (D). Place the other end of the Clear Tubing in a sink.
ATTENTION
Do not use any white tape on the threads of the Barbed Fitting. An O-ring is
located inside the POU Dispenser to ensure water tightness between the
threads of the POU Dispenser and the Barbed Fitting.
Advertising
This manual is related to the following products: