Martin Christ RVC 2-33 CDplus - Manual (Page 15)

RVC 2-33 CD &
Safety
Version 01/2009, Rev. 1.21 of 25/11/2013 - sb 15
Translation of the original operating manual
3.3 Responsibility of the Operator
The operator is responsible to authorise only qualified personnel to
work on the machine (see chapter 3.4 "Operating Personnel").
The areas of responsibility of the personnel concerning the operation,
maintenance, and care of the unit must be clearly defined.
The safety-conscious work of the personnel in compliance with the
operating manual and the relevant EC and national health and safety
regulations as well as with the accident prevention regulations must
be checked at regular intervals (e.g. every month).
The rotational vacuum concentrator has to be maintained regularly
(see chapter 1 "Maintenance and Service").
3.4 Operating Personnel
Persons operating the unit must
be familiar with the fundamental regulations concerning
workplace safety and accident prevention
have read and understood this operating manual (and in
particular the safety sections and warning notes) and confirmed
this with their signature.
3.5 Informal Safety Instructions
This operating manual is part of the product.
The operating manual must be kept at the location of use of the
rotational vacuum concentrator. Ensure that it is accessible at all
times.
The operating manual must be handed over to any subsequent
owner or operator of the rotational vacuum concentrator.
Any changes made must be added to the operating manual.
In addition to the operating manual, the general and local rules
and regulations concerning the prevention of accidents and the
protection of the environment must also be supplied.
Safety and danger indications on the rotational vacuum
concentrator must be kept readable at all times. If necessary,
they must be replaced.