Martin Christ RVC 2-33 CDplus - Manual (Page 48)

RVC 2-33 CD &
Using the RVC
48 Version 01/2009, Rev. 1.21 of 25/11/2013 - sb
Translation of the original operating manual
Click at button push
If this function is activated, a brief sound signal can be heard
whenever a key is pressed.
High temperature resolution
Temperatures are displayed in the values window with a resolution of
1 /
10
°C, normally with a resolution of 1°C.
Rotor speed
The rotor speed can be set in a range between 100 rpm and 1,350
rpm.
We guarantee that a speed of 1,550 rpm can be reached with all of
the available rotors. Higher speeds are possible in individual cases.
Continuous operation coldtrap (only if a cold trap is installed) and
Continuous operation VP
If these options are set to “yes”, the vacuum pump and the cold trap
will not be switched off after the evaporation. Instead, they will remain
active. This is useful if several evaporation processes are started in
succession
Service Menu
Fig. 6.37: Service menu
Rotor information
This function is not supported by this type of unit.
CD
plus
Configuration
In this menu, accessories (options) have to be configured.
If an option is installed, it has to be activated with “yes”.
If the option is not installed, it has to be deactivated with “no”.
Possible options:
Vacuum probe
Remote control cold trap (see 5.4.3 )
Air injection ("Valve block") (see 5.4.6)
Triple TMM (not supported by this type of unit)
Imbalance Detection (permanently active, not changeable)