Martin Christ RVC 2-33 CDplus - Manual (Page 27)

RVC 2-33 CD &
Set-up and Connection
Version 01/2009, Rev. 1.21 of 25/11/2013 - sb 27
Translation of the original operating manual
1 Aeration
2 Air injection
3 Fastener for non-
required connection
element
Fig. 5.3: Valve block
Just like the standard aeration valve, the valve block can also use
unpressurised inert gas. The following connection combinations are
possible:
1. Connection for aeration and "air injection" with ambient air
(state of delivery):
1 Aeration hose connection
2 Air filter
3 Fastener for non-required connection element;
here: hose nozzle
2. Connection for aeration with ambient air and "air injection"
with inert gas
1 Aeration hose connection
2 Air injection hose nozzle
3 Fastener for non-required connection element; here: air filter
3. Connection for aeration and "air injection" with inert gas
1 Aeration hose connection
2 Air injection hose nozzle
3 Fastener for non-required connection element; here: air filter
If gas (e.g. inert gas) is supplied through the hose nozzle for aeration
or for “air injection”, the threads of the hose nozzles must be sealed
with thread sealant, e.g. Loctite
® 542 (Loctite ® part number: 54223,
bottle with 10ml).
1 2 3