Martin Christ RVC 2-33 CDplus - Manual (Page 78)

Rotational Vacuum Concentrator RVC 2-33 IR
11 Appendix
78
Version 08/2009, Rev. 2.1 of 02/12/2014 • sb
Translation of the original operating manual
Swing-out rotors and accessories
WARNUNG
The balance point of the loaded bucket must be located considerably
below the pivotal point (see chapter 6.4.3 - "Installation of accessories")!
All products consist of aluminium (black anodised).
Plate Rotor type and accessories
Type Dimensions No. of
plates
per
rotor
No. of
plates
per
device
Configuration
Part no.
B x T x H (mm) (piece) (piece)
Basic rotor with triple TMM
Swing-out rotor for
microtiter plates (MTP)
assay plates (AP)
deepwell plates (DWP)
and massive bucket (MAB)
with microtiter plate footprint
124511
MTP
or
AP
or
DWP
max. 86.5 x 128.5 x 15.9
max. 86.5 x 128.5 x 25.9
max. 86.5 x 128.5 x 60.0 3
2
1 Carrier with integrated
temperature sensor, without
bottom window, suitable in
rotor Nr. 124700 with carrier
no. 124708; carrier plates no.
124704 and 124705 required
124701
MTP
or
AP
or
DWP
max. 86.5 x 128.5 x 15.9
max. 86.5 x 128.5 x 25.9
max. 86.5 x 128.5 x 60.0 3
2
1 Carrier without temperature
sensor, without bottom
window, suitable in
rotor Nr. 124700 with carrier
no. 124701; carrier plates no.
124704 and 124705 required
124708
2 Carrier plate with distance
pieces, red, height 6 mm,
suitable for carrier no. 124701
and 124708
124704
2 Carrier plate with distance
pieces, blue, height 16 mm,
suitable for carrier no. 124701
and 124708
124705