Xblue Networks X-25 - Manual (Page 101)

101
Service Mode
The system can run one of three different modes; Day, Night or Timed. While in the Day mode, calls will ring
into the day ringing location, the day Auto Attendant outgoing message (greeting) will play, and the Day Class
of Service will be applied to extensions’ dialing privilege. While in the Night mode, calls will ring into the night
ringing location, the night Auto Attendant outgoing message (greeting) will play and the Night Class of Service
will be applied to extensions’ dialing privilege. In timed mode, the system will automatically switch between
day and night modes. The system will be in day mode between the working hours, an entry of 08001700 will
place the system into day mode between 8 AM and 5 PM, after which the system will be in night mode. In
addition, you may defi ne a break time which will play a special Lunch Outgoing message (greeting) but does
not affect the dialing or ringing assignment.
Note: An entry of 000000 will not change the system’s current mode. For example, at default both
Saturday and Sunday are set to 000000, so the system remains in night mode over the weekend.
All times are entered in 24 hour format, which during the morning hours is 0 + The actual time,
08, 09, plus 11, and 12. The afternoon, the time is calculated by adding 12 to the time. For
example, 2pm + 12 = 14:00, 3pm + 12 = 15:00, 4pm +12= 16:00.
“Wireless Local Area Network (WLAN)”