Xblue Networks X-25 User Manual
Page 105
105
General Settings
•
Admin Password - This is the password that is used when rerecording the system’s outgoing messages.
•
MAX Try Time - Enter the number of times between 1 and 9 that a caller can enter the wrong information
before being sent to the action when “Max Error Reached”.
•
Action When MAX Error Reached - These are the two destinations; forward to operator or disconnect.
•
Prompt Language - Currently only English is supported
•
VAA Code - The default is set to PCMU - which is required in the United States.
•
RTP Packet Size - At default this is set to 20 milliseconds and is adjustable from Dynamic, 10 - 60, but
should remain set to 20 unless otherwise instructed by an XBLUE Networks Technical Support Engineer.
•
DISA - Direct Inward System Access - This feature, when enabled, allows inbound callers to enter a code
and gain access to system features such as outbound calling. Note: Enabling this feature may result in
unexpected long distance charges, which are the sole responsibility of the owner/user of the equipment.
•
Dial by Name Code - Enter the code that will be use by caller when dialing a person’s name, once they are
answered by the automated attendant. Once this code is selected, it will automatically reserve the entered
number on all 10 menus (0 - 9).
Menu Options
“Voice”