Xblue Networks X-25 - Manual (Page 47)

47
Call Park
Call park, often referred to as “Putting a call into Orbit” allows extension users to place a call into a special
holding area that can be retrieved by any other extension in the system by dialing the Park Answer Code.
Operation:
While on a telephone line call, the extension presses a preprogrammed call park button to park the call. Any
other extension in the system can dial the park code or press their preprogrammed button to retrieve the call.
Notes:
1. Only extension with a programmed call park button is allowed to park a call
2. Any extension that dials the park code while a call is placed in a park location, is able to retrieve the call
3. A call placed into a park location will receive Music on Hold
Call Pickup
This feature allows the user to pickup a call that is ringing at another extension.
Operation:
While a call is ringing at another extension, press the preprogrammed call pickup button or dial the call pickup
code, *53 + Extension Number. If the extensions are in the same pickup group the call will be picked up,
otherwise the extension will receive error tone.
Notes:
1. Call pickup does not work with the FXS (analog (SLT) telephone).
2. Both extensions must be in the same Pickup Group.
Call Waiting
When using an
X-2020 telephone you can enable call waiting which will send an special alert tone to your
telephone, indicating that a second call is ringing your extension. This tone can be disabled. If busy forward is
programmed, this feature will not work.
Operation:
To enable Call Waiting - dial *98 - this will allow the second call to ring.
To disable Call Waiting - Dial **98 - this will not allow the second call to ring.
Notes:
1. This feature only works with the
X-2020 telephone