Xblue Networks X-25 - Manual (Page 4)

WARNING
1. To avoid injury to yourself, or damage to the equipment, it is important to read and understand the
installation instructions carefully before installing or powering up the system.
2. Unauthorized opening the server, the telephone or other associated equipment may cause damage to the
equipment and yourself as well as voiding the manufactures warranty.
3. Do not install any equipment in direct sunlight or expose it to excessive heat or fi re.
4. Do not install any equipment where it can get wet by rain or other moisture or water.
5. Do not install any equipment in an area where it can be subjected to high or low impact.
6. When cleaning the equipment (system and phone) use a fi ne damp cloth. Never use solvents such as
trichloroethylene or acetone, which will permanently damage fi nish of any plastic surfaces. Never use a
spray cleaner as it may infi ltrate the equipment and cause serious damage.
7. The equipment is designed to work in temperatures ranging from 32º to 100º, with a relative humidity of
less than 80 percent.
8. Do not install any equipment within 10 feet from a device that emits radio frequency equipment, such as
TV’s, radios or other audio or video equipment. Other equipment to avoid is microwaves or high pulse
lighting such as photography equipment or other equipment that may radiate electromagnetic fi elds.
9. Do not connect the LAN or WAN port to anything other than a Ethernet network. Voltage from a telephone
line may cause serious damage, which is not covered by the warranty.
10. Be sure that there is no power interruptions when performing a system upgrade. If the power fails during
an upgrade, the system may need to be returned to have the software reloaded, at the owners expense.
11. Do not work on or install the system during a lightning storm. If possible, it is a good idea to unplug
all connections to the system during a lightning storm. Lightning damage is not covered by the
manufacturer’s warranty.
12. It is a good idea install the equipment where it is out of reach of children.
Only plug the system into a standard 120 volts AC + 10%.
13. Use only the provided 12 Volt 1.5 Amp power adapter to power up the system. Using any other power
adapter may cause damage to the system.
4