Xblue Networks X-25 - Manual (Page 44)

44
Call Forward - External
External Call forward allows you to forward your extension to an external telephone number. This will require
one incoming and one outgoing telephone line to complete this operation. The call, once forwarded are
monitored by the FXO to FXO Call Duration time, which, at default, is set to 5 minutes.
Operation:
Call Forward - External
* + CFW + t + * + pswd + * + Outside Number
CFW =
21 = Always (Direct) Forward
22 = Busy Call Forward
23 = No Answer Call Forward - This entry adds a “T” at the end (* + CFW + t + DDD + T
24 = Do Not Disturb
• t =
• 0 = For Intercom
• 1 = For outside Lines
• 2 = For both intercom and outside lines
• pswd =
• Voicemail password default is 4 zeros (0000)
• Outside Number =
• Any 7 or 11 digit telephone number such as a home or cellular telephone
• T =
• Wait time (0 to 60 seconds)
Examples:
* 21 2 450 = Direct forward to voicemail,
* 22 2 124 = Busy call forward to Extension 124
To Cancel the forwarding dial ** + CFW
Examples:
** 21 Cancel Direct Forward
**22 Cancel Busy Forward
Notes:
1. Follow me forward is an intercom function only
2. Direct call forward overrides all other forwarding, followed by DND and then Busy/No Answer
Forwarding
3. When using external forward, it will require one inbound and one outbound telephone line to function
correctly. Therefore, each call takes two telephone lines.
4. Once a call is established, the FXO to FXO Call Duration Time restricts the length of each call.