Xblue Networks X-25 User Manual
Page 135
Voice --> Trunk --> Call Routing
These entries assume that Group 4 is not being used and will route calls that are 12 digits or more, or that start
with 011 to line group 4, which has no telephone line access.
From To Min
Max
Del
Insert
Destination
200
[Area Code -1]
10
10
0
1
Group 1
[Area Code + 1]
899
10
10
0
1
Group 1
1200
1899
11
11
0
Group 1
200
999
12
99
9
Group 4
011
011
12
99
9
Group 4
[Area Code -1] – enter your local area code – 1. For example, the area code in New Hampshire is 603, so you
would enter 602.
[Area Code +1] – enter your area code + 1. For example, the area code in New Hampshire is 603, so you
would enter 604.
Voice --> Trunk --> Call Restriction
This entry will deny calls that begin with 011
From To
Trunk
Access
COS
Table
Type
011
011
N
0
Deny
Once you have completed this procedure it is a good idea to create a back up that includes the new settings.
Advanced Settings --> Upnp
Uncheck “Enable Upnp protocol”. Thus disabling the telephones ability to automatically register to your X-25.
To create a backup of your new database:
Management --> Settings --> Backup
Save this in a location that is easy to locate if it is needed.
[Continued]
135