Xblue Networks X-25 - Manual (Page 51)

51
Paging Allow/Deny
This feature allows the user to enter a code to allow or deny paging at their extension.
Operation:
To enable paging deny (to block paging at your extension) dial *99
To disable paging deny (to allow paging at your extension) dial **99
Notes:
Phone Lock/UnLock
The phone Lock/Unlock feature allows the user to lock their extension to prevent someone from making
unauthorized calls from their extension. The phone lock/unlock feature does not block intercom calls or any
calls that are entered into the “Emergency Numbers list, but it will block all other telephone line (PSTN or SIP)
calls.
Operation:
To lock the phone dial *97 + the extension’s mailbox password the default password is four zeros (0000)
To unlock the phone dial **97 + The extension’s mailbox password the default password is four zeros (0000)
Notes:
1. Locked extension’s can only make intercom or emergency calls
Service Mode
The operator has the ability to change between the system’s three service modes; Day, Night and Time. When
the system is in day mode, the day outgoing message will play and the day class of service will be referenced
when an extension dials a telephone number. Night mode, the night outgoing message will play and the night
class of service will be referenced when an extension dials a number. If the system is set to time mode, it will
automatically switch between day and night modes and the associated classes of service for day and night.
Operation:
Only the programmed attendant has the ability to swap between the service modes:
• Dial *790 - displays the current mode
• Dial *791 to change the system into day mode
• Dial *792 to change the system into night mode
• Dial *793 to change the system into time mode, to allow the system to automatically switch between
modes based on the programmed “Service Time Mode Table”.