Qsys memory map, The gpio tab, Character lcd – Altera Signal Integrity Development Kit, Stratix V GX Edition User Manual
Page 26: Qsys memory map –6, The gpio tab –6, Character lcd –6
6–6
Chapter 6: Board Test System
Using the Board Test System
Transceiver Signal Integrity Development Kit
July 2012
Altera Corporation
Stratix V GX Edition User Guide
Qsys Memory Map
The Qsys memory map control shows the memory map of the flash memory device
on your board.
The GPIO Tab
The GPIO tab allows you to interact with all the general purpose user I/O
components on your board. You can write to the character LCD, read DIP switch
settings, turn LEDs on or off, and detect push button presses.
shows the
GPIO
tab.
The following sections describe the controls on the GPIO tab.
Character LCD
The Character LCD controls allow you to display text strings on the character LCD on
your board. Type text in the text boxes and then click Display.
1
If you exceed the 16 character display limit on either line, a warning message appears.
Figure 6–3. The GPIO Tab