User dip switches, User leds, Push button switches – Altera Signal Integrity Development Kit, Stratix V GX Edition User Manual
Page 27: The flash tab, The flash tab –7
Chapter 6: Board Test System
6–7
Using the Board Test System
July 2012
Altera Corporation
Transceiver Signal Integrity Development Kit
Stratix V GX Edition User Guide
User DIP Switches
The read-only User DIP switches control displays the current positions of the
switches in the user DIP switch bank (SW4). Change the switches on the board to see
the graphical display change accordingly.
User LEDs
The User LEDs control displays the current state of the user LEDs. Toggle the LED
buttons to turn the board LEDs on and off.
Push Button Switches
The read-only Push button switches control displays the current state of the board
user push buttons. Press a push button on the board to see the graphical display
change accordingly.
The Flash Tab
The Flash tab allows you to read and write flash memory on your board.
shows the Flash tab.
Figure 6–4. The Flash Tab