5 reviewing measurement run data, Figure 21 – Casella CEL CEL-35X dBadge User Manual
Page 20
Advertising
Casella CEL-35X dBadge Users Handbook – Page 20
5.5 Reviewing Measurement Run Data
As soon as a measurement run has been stopped, the dBadge will
automatically display results from the completed measurement run.
The display will automatically cycle as shown in Figure 21. The
screen contents will depend upon which display mode is selected
(ISO or OSHA).
The last screen, highlighted in red, is only available on the CEL-352
dB
adge „Plus‟ model
Figure 21
Advertising