Casella CEL CEL-35X dBadge - Manual (Page 5)

Casella CEL-35X dBadge Users Handbook – Page 5
1 INTRODUCTION
The CEL-35X family consists of the CEL-350 dBadge, CEL-350L
dBadge
„Lite‟ and the CEL-352 dBadge „Plus‟.
The CEL-35X dBadge
is a unique solution to problems associated with the measurement of
personal noise exposure. Using the latest digital technology ensures
reliable and repeatable measurements
. The CEL-35X dBadge has no
cable like a traditional dosimeter, so is far easier to fit to an employee
and is less likely to interfere with the individuals work. Casella CEL
provides various mounting options for the dBadge.
The CEL-35X dBadge is very simple operate with just 2 keys, and can
be locked to prevent tampering. After a measurement has been
completed the noise badge can be downloaded
via it‟s infra-red port to
the Casella insight data management software. This will allow
comprehensive analysis of an employee‟s exposure.
This manual describes the operation of the CEL-35X dBadge and the
associated mounting options, as well as charging the dBadge.
Use of the CEL-35X/IS Intrinsically Safe (I.S.) dBadge is described,
including special requirements for use under ATEX certification.
The CEL-350L is an entry level model that does not store the time
history of the noise data.
The CEL-352 dB
adge „Plus‟ measures additional values which allow
for the selection of hearing protection via the Single Number Rating
(SNR) or High, Medium, Low (HML) methods.