Casella CEL CEL-35X dBadge - Manual (Page 30)

Casella CEL-35X dBadge Users Handbook – Page 30
CEL-6354 Hard Hat
Mounting Kit
6.3 CEL-6353 Harness Mounting Kit
The CEL-6351 is used for attaching the CEL-35X to the D8147
harness or an existing harness that the employee may wear. The
CEL-6351 Pin kit and the D8147 are pictured in Figure 28.
Figure 28
6.4 CEL-6354 Hard Hat Mounting Kit
The CEL-6354 hard hat mounting kit can be used to fit the CEL-35X
dBadge to most hard hats. It consists of a loop with four hooks which
loop over the rim of the hard hat. The CEL-6351 pin clips are used to
connect the hard hat mounting kit to the dBadge.
Figure 29
CEL-6351 Pin Mounting Kit,
Fitted to D8147 Harness
CEL-6354 Fitted to a
Hard Hat