Casella CEL CEL-35X dBadge - Manual (Page 9)

Casella CEL-35X dBadge Users Handbook – Page 9
Figure 2
3.3 The CEL-6362 Charger
A CEL-6362 is a drop-in intelligent 3-way charger unit, required to
charge the internal Nickel Metal Hydride (NiMH) batteries on the CEL-
35X dBadge. The CEL-6362 consists of the charger base, part
number 193102B-01 and the -PC18 mains power supply unit (PSU).
The PSU will require fitting with an appropriate plug connector
(supplied) for the country of use.
Figure 3
Note that charger base 193102B-01 is for use with the CEL-35X and
the CEL-35X/IS. The previous version of the charger base (193038B-
01) can only be used with the CEL-35X and NOT the CEL-35X/IS.
Screws for
mounting
clips
Crocodile
Mounting
Clips