Casella CEL CEL-35X dBadge - Manual (Page 26)

Casella CEL-35X dBadge Users Handbook – Page 26
5.8 Alarm Settings
Alarm levels can be set within the Casella insight data management
software based on action levels for local workplace noise regulations.
They can be used by an employer as a visual indicator of an
individual's exposure throughout the day and can be switched „on‟ or
„off‟ as per section 5.6. If these pre-determined alarm levels are
exceeded then the blue LED on the front of the CEL-35X will flash.
The location of the LED is shown in Figure 24.
Figure 24
The default alarm levels will depend on which display mode is
selected, either ISO or OSHA mode. The default levels are
summarised in the following table.
Red and Blue
LED Window