Casella CEL Airborne particulate monitoring system - Manual (Page 33)

HB3256-03 Page 31
The program will wait for the heated inlet to reach the correct operating temperature and will
then automatically turn the pump on and off.
A display window will contain various test values including the probe signal voltage (used for
setting 'zero' adjustment on signal processing unit) and also the flow sensor calibration constants
'C' and 'M'.
Flow sensor values may be updated within the following line of the loggers operating program
'COMMAND.CMD'
Y12=-5.368,0.0116"l/min."
(Y12=Cvalue,Mvalue"l/min.")