CIRCUTOR CIReQ - Manual (Page 7)

_______________________________________________________
_________________________________________________________________________________________________________
CIR-eQ User’s Manual 7 of 36
1.- LIMITATION OF LIABILITY
CIRCUTOR, SA reserves the right to modify the device or the specifications of the
equipment, described in this instruction manual, without prior notice. CIRCUTOR, SA
recommends obtaining the latest version of the unit's specifications and applications of
the device from: http://cir-e3.circutor.com
CIRCUTOR, SA recommends the use of the original cables and
accessories supplied with the unit.
2.- VERIFICATION UPON RECEPTION
CIR-eQ has been designed to incorporate the latest technologies and it offers the most
advanced performance features in the market for the measurement and recording of the
electrical parameters of electrical networks.
Please read this manual carefully before connecting the unit, in order
to avoid any incorrect usage that could seriously damage the unit.
Check the following when you receive the unit:
a) The unit's specifications are the same as you order.
b) The unit has not been damaged during transport.
c) Check that the following accessories are included:
1 Transport bag.
1 CIR-eQ measurement unit
1 SD Card with mínimum 1 Gb capacity.
1 Kit of six power supply and voltage cables (2 m).
4 Crocodile clamps.
1 RS-232 Communications wire.
1 SD Card reader.
1 User’s Manual
3.- SAFETY PRECAUTIONS.
Please observe the warnings described in this manual. The warnings are marked with
the following symbols.
DANGER: Electrical risk warning.
ATTENTION: Special attention message or warning.
DANGER Do not handle when connected.