Pinnacle Systems STTS - Manual (Page 30)

24
MAINTENANCE
WARNING: Read the entire maintenance section of the manual before any maintenance is attempted.
The tasks which require definite technical knowledge or particular skills should be carried out exclusively
by suitably-trained personnel.
Inspections of the STTS Safety Mat System™ should be conducted daily to assure that all mats in the
guarded zone are working properly.
Cleaning of the mats with grease cutting soaps and water is permissible.
Refer to the Table of Contents for the proper section for fault displays, potential causes and cures, and
possible remedies.
WARNING: Replace all perimeter trim pieces and screw anchors after maintenance. If the components
are not correctly replaced and fitted properly, the requirements for the safety device may not be met.
WARNING: Only replacement parts approved by the manufacturer may be replaced by the user and that
non-approved spares used with the safety device may not function to the designed requirements.