Pinnacle Systems STTS User Manual
Page 5
ii
LIMITATION OF LIABILITY
In the event of any claim for breach of any obligations of manufacturer under any order, whether
expressed or implied, and particularly in the event of any claim of a breach of the warranty or warranties
contained in the paragraph "WARRANTY" or of any other warranties, expressed or implied, which might
despite the paragraph entitled "DISCLAIMER," be determined to be incorporated in any order, the
company shall, under no circumstances, be liable for any consequential or special damages, either in law
or in equity, or for losses or expenses or claims for the same arising from the use of, or inability to use,
the products of the manufacturer for any purpose whatsoever.
We have designed our equipment to the very highest performance and safety standards known to the
current technological state of the art. However, the installation, usage, suitability, and fitness of our
equipment for any purpose, known or unknown, is interdependent upon the performance of other
equipment not manufactured, installed, secured, or maintained by Pinnacle Systems, Inc.
We cannot and do not accept responsibility for any overall system performance when factors, such as
these, are beyond our control.
WARNING: The entire machine safety system must be tested at the start of every shift. Machine
testing should include: (1) proper machine operation and stopping capability; and (2) verification of
proper installation and settings of all point of operation guards and devices before the operation is
released for production.
WARNING
This installation manual must be read in full prior to any installation work being started.