Proceed PAV User Manual
Page 63
63
3
Press either the
vcr
Device button to set-up for VCR Transport
Control or the
cd
Device button to set-up for CD Transport
Control.
VCR
or
CD
will flash in the LCD, depending on the
Device button selected.
The VCR or CD Transport Controls (Play, Stop, Fast Forward, Rewind, Pause
and Record) will now override the original functions of the buttons in this
mode.
To return to the original setting, follow these steps:
1
Select the mode that you want to turn off the Transport Control
“Punch-Through” and press the corresponding Device button
and the
mute
button simultaneously.
SET
will appear in the
LCD.
2
Press the
play
button.
PUNCH
will appear in the LCD.
3
Press the same Device button again. The Device mode will
flash in the LCD.
The VCR or CD Transport Control “Punch-Through” is now turned off. The
original functions assigned to these buttons are restored.
memory buttons
There are five memory buttons (
m1
~
m4
,
power/standby
) that are designed to
store up to 15 commands in each button. Pressing any one of the memory
buttons will send out the series of commands that are stored in that button.
standby
mute
power
input
record
adjust
channel
m1
m2
light
m3
path
m4
Memory Buttons
You can either turn on or off up to eight devices by storing Power on/off
commands or use it to select the favorite channels by storing channel numbers
into the button. You can also combine Power on/off, select favorite channel
and any of the features in the remote control to these buttons.
You can program any of the memory buttons (
m1
~
m4
,
power/standby
) in
AUD
mode and it will send out the stored commands in Audio, CD, DVD and
AUX modes. You can also program the memory buttons in
SAT
mode, and it
will send out the stored commands in Satellite, TV, VCR and CBL modes.
• MACRO COMMANDS:
Memory Buttons can store and emit up to 15 commands including multiple
Power On/Off sequences. As an example, in the Audio mode, the
power/
standby
Memory Button can be programmed to turn on the TV, turn on the
PAV, turn on the VCR and turn on the Satellite receiver with one button push.
• FAVORITE CHANNELS:
Memory Buttons can provide direct access to your channel with a one-button
push. As and example, in the SAT device mode each of the Memory Buttons
m1
,
m2
,
m3
and
m4
can provide direct access to a different satellite channel by send-
ing out the three-digit channel number for that channel to your satellite receiver
with a one-button push.