Top Global MB5000K - Manual (Page 21)

Top Global USA. ----MB5000 User Guide
z Host Name: Up to 64 characters name to represent MB5000. The device default
name is topglobalXXXXXX(“XXXXXX” means the last 6 digits of SN)
z Serial Speed：When you need a backup link (for example, the v.90 modem) for
MB5000, you might need to configure the serial speed for the modem. There are
totally 6 options for the serial speed (bps): 115200, 57600, 38400, 19200, 9600, and
4800. You may need to reference to the user guide of the modem to configure the
right speed.
z ALG plugin：This technique relies on the installation of a new, enhanced
Firewall/NAT - called an Application Layer Gateway. MB5000 provides two kinds of
ALG plugin names SIP and H.323. When you choose either, you can plug the
protocol.
z Username: Username for MB5000’s web administration. The default username is
public.
z Password: Password for MB5000’s web administration. The default password is
public.
z webGUI Protocol: The protocol web configuration used. HTTP is the only Current
choice.
z webGUI port: The TCP port for HTTP. It is 80 by default. Generally, we don’t suggest
to modify this unless you have the knowledge about it. If you want to manage the
MB5000 from the Internet, you may need to check the box for Enable management
from WAN, and modify the TCP port number if needed.
Note:
Submit is not equal to keep the configuration information permanently in the
device. User must reboot the system, and then the configuration will be saved.
So if user saves the configuration, and doesn’t reboot the device through the
webGUI, all of the changed configurations information will be lost.
- 21 -