Top Global MB5000K - Manual (Page 43)

Top Global USA. ----MB5000 User Guide
3.4.3.2 DHCP
Figure 3-27 DHCP
„ DHCP Configuration
This setting is used to configure MB5000’s Dynamic Host Configuration Protocol
(DHCP) server function. MB5000 can be used as a DHCP server for the internal LAN
network. The DHCP server automatically assigns an IP address to each computer in
the LAN network. If you choose to enable MB5000’s DHCP server option, you must
configure all of PCs in the LAN network to connect to this DHCP server (MB5000),
and make sure there is no other DHCP server on your network.
DHCP is enabled by factory default. If there is already a DHCP server in the LAN
network or a DHCP server is not necessary for the LAN network, the Enable DHCP
Server on LAN Interface can be un-checked. (Other DHCP features will be
disabled).
- 43 -