Top Global MB5000K - Manual (Page 61)

Top Global USA. ----MB5000 User Guide
‹ Function Summary
The interfaces’ status displays all the network interfaces information of MB5000. You
can also do the dial up and hang off WAN connection here.
‹ Detailed information:
WAN Interface#0: This block shows the information of Wireless WAN data card
inserted in MB5000. The Status field shows whether the wireless WAN card has dialed up
to the Internet. Or if no data card exists, it will inform “No data card was found.”. When a
data card is inserted and the “Connect Mode” on the “Internet Access” page is set to
“Manual”, the information about this interface will be displayed as below:
The status field shows the current status of the cellular wireless WAN card. Users can
click the button Connect/Disconnect to do dial up and hang off.
The Up Time field shows how long in second that this interface has been connected
to the Internet since last dialing up.
The IP Address field and the Network Mask field shows the IP address and the
subnet mask that the interface obtained from the PPP dialing negotiation.
The “In/out packets” field shows how many packets have been passed through this
interface since the last dialing up.
WAN interface#1 : This block shows the information on the interface of the serial
modem. The meaning for each field is same as the former ones.
LAN interface : This block shows the information on the LAN interface.
- 61 -