Top Global MB5000K - Manual (Page 32)

Top Global USA. ----MB5000 User Guide
operator. Please consult your mobile operator for that.
z Password: Provide a password for your wireless internet dialing. Also you need to
consult your mobile operator for that.
Note：
If the wireless WAN card connects to a GRPS network, it is different from the type of the
CDMA. The parameters to be configured are as shown as Figure 3-18 and Figure 3-19.
Figure 3-18 An example username and password setting for Cingular GPRS network
This is the type of the CDMA wireless wan card to configure:
Figure 3-19
There may be some operators do not require the username and password for the dialing,
if so, please leave them empty (NULL).
z Card model: When a cellular PC Card is inserted into the MB5000 correctly, it will
automatically detect the WAN card type. If the 3G data card is supported and
recognized by the MB5000, the name and model of the wireless WAN card will be
listed here. Please contact Top Global for a list of all supported 3G data cards.
z Signal strength: Indicates the current cellular network’s signal strength. Value 31 is
the best signal strength indication. The less value, the worse signal strength. If this
value is 0, you do not have a signal, please check the wireless WAN card carefully to
make sure it is inserted correctly and you may need to call your mobile operator to
make sure your area is covered within their network;
z Modem: If Enable custom parameters is checked, the parameters to be configured
are as shown as Figure 3-20.
- 32 -