Top Global MB5000K - Manual (Page 41)

Top Global USA. ----MB5000 User Guide
Disable
: Indicates no access control function, allow all of the stations connect to MB5000;
Allow
: Indicates only allow the stations which have the MAC addresses listed in the table
to access the MB5000;
Deny:
Indicates only deny the stations which have the MAC addresses listed in the table to
access the MB5000;
Stations connected: In order to add the ACL conveniently, the MAC addresses of
stations which have been already connected to MB5000 appear in this domain. Click the
Refresh
button, this list will be updated.
Access Control List: The MAC addresses of stations which have been allowed or denied
to connect to MB5000 are saved in this list box.
There are 2 methods to input the MAC address: one is to select the station item in the
Station Connected list, then click Add; the other is to input the station MAC address
through MAC address edit box on the page (below the ACL), the input MAC address
format must be XX:XX:XX:XX:XX:XX.
Note:
Don’t forget to click Save button to save the settings.
3.4.3 Service
There are two main categories in this setting:
„ Dynamic DNS
„ DHCP
- 41 -